When was the last time the roof of one’s building was inspected? If it’s been awhile, the roof could have problems lurking that need immediate attention. Some roof problems cause obvious signs such as for example leaks, while some produce subtle signs which are only detectable at first glance. In either case, leaving the problems unaddressed can cost you a small fortune once you finally repair them. If the roof on your building has any of the problems listed below, a company that specializes in commercial roofing should repair them quickly:
Buckled Panels
Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are probably one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that contain the panels in place. This creates an area where water can leak underneath the panels and soak the roof deck. After the deck becomes saturated, the problem is costly to fix.
Blistering
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose an issue, large ones can rupture and invite water to seep under the bitumen. After the blisters form, warm weather typically makes them worse. Because of the humid subtropical climate in a few regions of the country, commercial roofing frequently experiences blistering.
Ponding Water
Blocked drains and improper sloping could cause water to gather in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more complex. Often, installing a taper insulation system to determine a new slope is the greatest solution. During the rainy season, resolving ponding water is one of the most common types of roof repair.
Loose Flashing
Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. Over time, most flashing must be resealed. If it is not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Missing Mortar
Chimneys and high elements of brick walls that have sections of missing mortar may cause leaks. Roof cleaning near me are often recognised incorrectly as leaks in the roof membrane, but a thorough inspection by a company that focuses on commercial roofing will reveal the real problem. Most sections of missing mortar could be repaired with basic tuck pointing procedures.
Conclusion
The problems above are a few of the most common reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is best way to ensure problems are detected early.